Care And Cleaning - Rampage Trail Guard Front Bumper Instrucciones De Instalación

3
Reconnect the fog lights and route the wiring
harness so that it does not hang below the
bumper.
Figure 5

Care and Cleaning

• Rampage Bumpers are built to last; any detergent you use to wash your vehicle is sufficient to clean the
bumper. Do not use any harsh abrasive detergents. Periodically check and retighten hardware.
Congratulations!
You have purchased one of the many quality Rampage branded products offered by Lund International. We take the
utmost pride in our products and want you to enjoy years of satisfaction from your investment. We have made every
effort to ensure that your product is top quality in terms of fit, durability, finish and ease of installation.
The material that your product is made from can
be recycled. Please also consider recycling the
packaging that your product came in.
800-328-2409 • Visit us at Rampageproducts.com
© 2018 Lund Motion Products, Inc. All rights reserved.
Rampage Products™ is a trademark of Lund Motion Products, Inc.
Page 3 of 3
4
Test fit winch on built in winch plate. See Figure
5. Follow winch manufacturer's installation
guidelines.
Some winches (such as the Warn Zeon
series) will require trimming the frame horn for
clearance.
Measure 3/8" (10mm) from the inside top edge
shown in Figure 6. Carefully trim the frame on
both the left and right frame horns.
Figure 6
Trim Here
Left Front Frame Horn Shown