Internal Terminal Block; User Menu; Pause The Pump; Priming The Pump - Aqua HC997-1 Manual De Instruccion

HC997-999 – MOD. D
Digital multifunction solenoid metering pump
2.5 I
NTERNAL TERMINAL BLOCK

CAUTION: Always disconnect power when servicing the unit.
INPUT PINS
INPUT mA
INPUT FLOW 3-4-5
INPUT PULSE
INPUT LEVEL
INPUT
CHLORINE 16-17
JUMO

3.0 USER MENU

Once the pumps is switched on the display show an user menu and is possible to read some information regarding
the functioning mode and the possibility to pause and prime the pump.
Moreover from the standby menu is possible to enter in the user menu to perform some functions.
3.1 P
AUSE THE PUMP
From the standby menu press the
Press twice the key to go back at the standby menu.
3.2 P
RIMING THE PUMP
From the standby menu press twice the
Keep pressed the key to activate the pump.
Press the key to go back at the standby menu.
ADSP9000033
All manuals and user guides at all-guides.com
DESCRIPTION
Input to connect a 0÷20mA
1-2 current signal that comes from a
controller.
Input to connect a flow sensor.
6-7 Input to connect a water meter.
8-9 Input to connect a level probe.
Input to connect
a chlorine A- J probe.
key, the display will show:
key, the display will show:
03/09/2015 Rev.1.2
TECHNICAL FEATURES
ENGLISH
WHAT CONNECT
997 Break
30/100