Tabla De Contenido; General Aspects; Safety Regulations - Stiga MP 20 Li A Manual De Instrucciones

WARNING!: READ THE INSTRUCTION BOOKLET THOROUGHLY
EN
BEFORE USING THE MACHINE. Keep for future reference.
TABLE OF CONTENTS
1. GENERAL ASPECTS ................................... 1
2. SAFETY REGULATIONS .............................. 1
3. GETTING TO KNOW THE MACHINE ........... 5
3.1 Description of the machine and planned
use ........................................................ 5
3.2 Main components (fig. 1) ....................... 6
3.3 Identification label (fig. 1) ...................... 6
3.4 Safety signs (fig. 2) ................................ 6
4. ASSEMBLY ................................................... 7
4.1 Unpacking ............................................. 7
4.2 Assembly of the guide bar and toothed
chain ..................................................... 7
4.3 Assembly of Pruner device .................... 8
4.4 Extension of the Pruner device .............. 8
4.5 Removing the Pruner device ................. 8
5. CONTROLS.................................................. 8
5.1 Throttle trigger lever .............................. 8
5.2 Throttle lock button ............................... 8
6. USING THE MACHINE ................................. 8
6.1 Preliminary procedures ......................... 8
6.2 Safety checks ........................................ 9
6.3 Start-up ................................................. 9
6.4 Working ................................................. 9
6.5 Advice for operation ............................ 10
6.6 Stop .................................................... 10
6.7 After use .............................................. 11
7. MAINTENANCE ......................................... 11
7.1 General information ............................. 11
7.2 Battery ................................................ 11
7.3 Topping up the chain oil tank ............... 11
7.4 Cleaning .............................................. 12
7.5 chain catcher....................................... 12
7.6 Machine and bar lubrication holes ...... 12
7.7 Nuts and bolts ..................................... 12
7.8 Chain drive sprocket ........................... 12
7.9 Maintenance of the toothed chain ....... 12
7.10 Guide bar maintenance ....................... 13
8. STORING ................................................... 13
8.1 Storing the machine ............................ 13
8.2 Storing the battery ............................... 13
9. HANDLING AND TRANSPORTATION ....... 13
10. ASSISTANCE AND REPAIRS ..................... 13
11. WARRANTY COVERAGE .......................... 13
12. TROUBLESHOOTING ................................ 14
13. ATTACHMENTS ON REQUEST ................. 16
13.1 Battery ................................................ 16
13.2 Battery charger ................................... 16
13.3 Bars and chains .................................. 16

1. GENERAL ASPECTS

1.1 HOW TO READ THE MANUAL
NOTE or IMPORTANT These give
details or further information on what has been
previously indicated and aim to prevent damage
to the machine or cause other damage.
The symbol highlights danger. Failure to
observe the warning can lead to the risk of
injury to oneself and others and/or damage.
The paragraphs inside a grey dotted frame
refer to optional features not available on all
the models referred to in this booklet. Check
if the feature is available on your model.
Whenever reference is made to a position on the
machine "front", "back", "left" or "right" hand side,
this refers to the operator's working position.

2. SAFETY REGULATIONS

2.1 GENERAL SAFETY WARNINGS
Read all safety warnings, instructions,
illustrations and specifications. provided
with this power tool. Failure lo follow
all instructions listed below may result in
electric shock, fire and/or serious injury.
Save all warnings and instructions
for future reference.
The term "power tool" in the warnings refers
to your mains-opera/eel (cordecl) power tool
or battery-operated (cordless) power tool.
1) Work area safety
a) Keep work area clean and well lit.
Cluttered or dark areas invite accidents.
b) Do not operate power tools in
explosive atmospheres, such as in
the presence of flammable liquids,
gases or dust. Power tools create sparks
which may ignite the dust or fumes.
c) Keep children and bystanders
well away while using power tools.
Distractions can cause you to lose control.
EN - 1