Operation; Speaker Phone Operation; Speaker Volume Control; On-Screen Dialing - Spiker TP1 Manual De Usuario

2. Press MENU key to confirm, then using ? / ? to set the alarm time, after the completion of
every item, press MENU key to confirm.
3. Press ? / ? to select the alarm tone you wanted, the unit provide three alarm tones.
4. Confirm by MENU, then the unit will enter the alarm 2 setting, you can skip the setting using
MENU key.

OPERATION

SPEAKER PHONE OPERATION

With the handset on the cradle, press the
When you hear the called party answers the phone, you can begin your conversation without
picking up the handset. You can also answer an incoming call by pressing the

SPEAKER VOLUME CONTROL

During the speaker phone operation, the user can adjust the speaker volume level (high, middle
and low) by pressing the

ON-SCREEN DIALING

The unit has on-screen dialing function when you may enter and edit the number before dial it out.
The following procedure describes how to use this function:
1. Leave the handset on the cradle and ensure the unit not seizing the line using speaker phone
function
Enter the number you dial, you can press
2.
Press button once
3.
4. The unit will dial out the number show on the LCD using hands free mode, or if the user
already engage the line, the number will dial out directly.

DURATION OF CALL

The timer will count automatically after 8s as the telephone line is engaged.
AUTO REDIAL
The unit can dial out a number automatically. The procedures are:
1. Dial the number which has been entered or dialed out from memory
2. Press button once, this number will be shown in the LCD & dialed out.
3. The unit will dial out the number automatically for 12 times at most until the connection is established,
the time interval is 10seconds.
button once to obtain a dial tone. Dial your number.
button.
button to correct the number.
31
User manual Spiker TP1
button once.