Music Enjoyment - Spiker TP1 Manual De Usuario

User manual Spiker TP1
How to turn the CID broadcasting function on and set the broadcast times.
1. In standby mode hold
LCD (OFF is blinking). OFF means the function is closed & 1 means broadcast times.
2. Turn on the broadcasting function by ? / ? key, then use MENU key to confirm.
3. Enter the broadcast times (1-4) by ? / ? key if you need to broadcast more times.
Noted:
- After CID number broadcasting function has been activated, every time, the calling number will
be broadcast as per the setting times automatically after hearing a prompt music sound.
- Before you set the function, please ensure that you have installed 4 AAA batteries.
How to turn on the dialed number broadcasting function.
In standby mode, press
function will be activated, then every times when you dial any number key, the unit will broadcast
the number in on-hook mode, if you want to deactivate this function, press
How to set the remote control code.
The unit provides the facility to check the new caller ID remotely when you are away from
your phone, before using this function, you need to activate the function and set the
remote control code according to the following procedures:
1. After setting the CID number broadcasting, press MENU button, 'rE OFF8888' is shown in LCD
(OFF is blinking).
2. Press ? / ? button to select ON to activate this function& press MENU button to confirm it,
then the '8888'will be blinking one by one. (8888: default password of remote controlling).
3. Enter the password by ? / ? key & press MENU button to 'shift' the digit of password (from
leftmost to rightmost). Press MENU button to save the password.
Working: When the function is activated, you can call back from outside. If there is no answer from
the phone after ringing 5 times, the phone will 'auto-answer and after a "beep" reminder sound,
you can input the password which has been set before. Then you will hear the new CID number
information.
Note: The function of remote controlling will be still activated even if no new CID number exists.
The phone will only make the Bi-BiBi sound before disconnecting.

MUSIC ENJOYMENT

In standby mode you can press " Hold " button to enjoy the polyphonic music, after you press "
HOLD" key, the unit will play built-in 5 polyphonic music one by one circularly till any other key is
pressed.
button for 2s, then ' E SCUCHAR ID OF1' will be shown in the
key once, one short music will be heard and the dialed speech
34
key once again.