Medela Swing Maxi Manual Del Usuario página 20

Assembling the breast pump (cont.)
20
To prevent damage to the breast pump all components must be completely dry before use.
swing maxi
101043399-2021-04-A-swing-maxi-MedelaFamily-MD-ifu-ENUS-FRCA-ESMX.indb 20 101043399-2021-04-A-swing-maxi-MedelaFamily-MD-ifu-ENUS-FRCA-ESMX.indb 20
NOTICE
1. Carefully insert the yellow membrane with the flap into the
opening of the connector body.
Æ Make sure that the membrane forms a seal around the
edge of the connector body.
2. Close the connector lid until it audibly clicks.
3. Screw the connector onto the bottle.
4. Carefully push the breast shield into the connector.
NOTICE
It is important to use only PersonalFit Flex™ connectors and
Swing Maxi™ tubing with your breast pump. The connector
creates a closed system designed to prevent milk back up.
=
Please ensure that all parts are completely dry before use.
Incompatible or wet components may cause irreversible
damage to your breast pump.
05/07/2021 12:15:26 05/07/2021 12:15:26