Use And Function - Lenz rcB 1200 Manual De Instrucciones

OPERATING INSTRUCTIONS / ENGLISH
If there is no sock / vest / brace / glove or charger connected to the battery packs, the
battery packs will automatically switch to POWER OFF mode after 12 hours!
IN USE:
The battery packs supply energy to the connected sock / vest / brace / glove.
￭
STANDBY:
The heat setting display (Fig. 1.2) briefly flashes at an interval of 2.5 seconds.
￭
The battery packs are in stand-by and can be activated with the control button of the battery packs
￭
(Fig. 1.3), via the Lenz HeatApp* (Smartphone) or via the remote control (available as an accessory).

USE AND FUNCTION

The battery pack supplies energy to the connected sock / vest / brace or glove; the heat setting
display (Fig. 1.2) indicates the selected heat setting.
Turning on/off:
Turn on the product on the lowest heat setting by briefly pushing (approximately 0.5 seconds) the
control button on the battery pack (Fig. 1.3).
Push the control key repeatedly to switch to the next higher setting and back to standby mode
after level 3.
The respective heat setting is indicated by the flashing of the heat setting display (Fig. 1.2) on
￭
the battery pack.
If there is no sock / vest / brace / glove or charger connected to the battery packs, the
battery packs will automatically switch to POWER OFF mode after 12 hours!
(If you are using the Lenz Heat App* to control your battery packs remotely, the app must also
be closed on your smartphone in order for the battery packs to be able to successfully switch to
POWER OFF mode.)
LED, flashing – standby (no heating power)
LED, steady on – low heating power
LEDs, steady on – meduim heating power
LEDs, steady on – high heating power
– 28 –