Time/Calendar Setting - Seiko V110 Manual De Instrucciones

TIME/CALENDAR SETTING

l Models with two/three hands
1. Pull out the crown to the first click.
2. Turn the crown to set the desired time.
3. Push back the crown completely (in
accordance with a time signal for a
three-hand model.)
l Models with date
1. Pull out the crown to the first click and
set the previous day's date.
2. Pull out the crown to the second click
w he n the s e c ond hand i s a t the 12
o'clock position.
3. Turn the crown until the desired date
appears.
4. Turn the crown to set the hour and
minute hands to the desired time.
5. Push back the crown completely in
accordance with a time signal.
8
Hour hand Second hand
Minute hand
Calendar
NOTES:
1. Do not set the date between 9:00 p.m. and 1:00 a.m. Otherwise, it may not
change properly.
• If it is necessary to set the date during that time period, first change the time
to any time outside it, set the date and then reset the correct time.
2. When setting the hour hand, check that AM/PM is correctly set.
• The watch is so designed that the date changes once in 24 hours. Turn the
hands past the 12 o'clock marker to determine whether the watch is set for the
A.M. or P.M. period. If the date changes, the time is set for the A.M. period.
If the date does not change, the time is set for the P.M. period.
3. When setting the minute hand, first advance it 4 to 5 minutes ahead of the desired
time and then turn it back to the exact minute.
4. It is necessary to adjust the date at the end of February and 30-day months.