Skil CR5429B-00 Manual Del Propietário página 18

Saw Hook (Fig . 10)
Your tool is equipped with a hook. Use the hook
to hang the saw from a rafter or beam, or other
similar secure structure for temporary storage
during work breaks. Recommended lumber
size to support the saw with the hook: 2x4.
To use, lift up the hook until it snaps into the
open position.
When not in use, always lower the hook until it
snaps into the closed position.
WARNING
the saw or the object that it is hanging from.
Do not hang the saw from any electrical
wires. Make sure that the structure used to
hang the saw is secure. Personal injury or property damage may occur.
Only use the hook for hanging the saw. Using the hook to hang anything else could lead to
serious injury.
Do not use the hook to reach another object or use the hook to support your weight in
any situation.
18
When the saw is hung by
the hook, do not shake
Fig. 10