Assembly - Skil CR5429B-00 Manual Del Propietário

ASSEMBLY

WARNING
could result in serious personal injury.
WARNING
is misuse and could result in a hazardous condition leading to possible serious injury.
Attaching/Detaching the Battery
Packs (Fig . 2)
WARNING
performing any assembly, adjustments, or
changing accessories. Such preventive safety
measures reduce the risk of starting the tool
accidentally.
Your tool is powered by two battery packs.
NOTE: The tool does not work with only one
battery pack.
To attach the battery packs:
Align the raised ribs on the battery pack with
the grooves on the tool, and then slide the
battery pack onto the tool. Repeat these steps with the second battery pack.
NOTICE: When placing the battery packs on the tool, be sure that the raised ribs on the battery
packs aligns with the grooves inside the tool and that the latches snap into place properly.
Improper attachment of the battery packs can cause damage to internal components.
To detach the battery packs:
Depress the battery-release button, located on the front of the battery pack, to release the
battery pack. Pull the battery pack out and remove it from the tool. Repeat these steps with the
second battery pack.
WARNING
If any parts are damaged or missing, do not operate this product until
the parts are replaced. Use of this product with damaged or missing parts
Do not attempt to modify this tool or create accessories not
recommended for use with this tool. Any such alteration or modification
Detach the battery packs
from the tool before
Always switch off the tool before attaching or detaching the battery
packs.
Fig. 2
Battery-release
Buttons
Attach
Detach
13