Carlson Pet Products 0800 G DS Guia De Inicio Rapido página 4

STEP 5
C
Insert left side tube (D,E) through side of mesh into top end cap (A).
Lastly, connect bottom end cap (C).
STEP 7
Place gate in doorway then rotate (clockwise) top and bottom handle to tighten.
Make sure feet are touching floor.
STEP 6
Pull top and bottom bars outward on each side until leg tube spring pins "snap"
with engagement.
Leg tube spring pins must be engaged for proper assembly. Reference STEP 3.
NOTE:
To disassemble, disengage spring pins on side bars.
STEP 8
B
H
Use zipper to open or close small pet door.