Bestway Smart Hub
Download Bestway
NOTE: The device can only be connected to one mobile phone at a time. If you
need to connect to another mobile phone, press the Wi-Fi button for 3 seconds.
When the indicator light flashes slowly, the device will clear the connection
information from the previous mobile phone. Please follow the instructions to
connect the new phone to the pump.
NOTE: Before connecting the app to the pump, please make sure that your mobile
device is close to the pump and the Wi-Fi signal is strong.
NOTE: This app supports Android 7.0 and above or iOS 10.0 and above.
NOTE: The device only supports distributing 2.4G network, but does not support
5G network.
NOTE: It is not recommended to use public Wi-Fi. When connected to public Wi-Fi,
you may have issues with the input verification codes during log-in.
STEP 1:
Ensure your mobile device is connected to Wi-Fi.
STEP 2:
Plug in the spa. Press and hold the
Wi-Fi indicator light should be flashing slowly.
NOTE:
Ensure the spa is plugged in and test the PRCD.
3
STEP
:
Open the Bestway Smart Hub™ App on your mobile device. Follow the step-by-step guide to sync with
your app.
○ Login or register your account.
○ Once the Wi-Fi network has been found, input your Wi-Fi password.
○ Change to the Wi-Fi service to: BW-LayZSPA-xxx Password: 123456789
(Andriod system will skip this step and start the connection process directly)
○ Go back to the app, and wait until the connection process is finished.
Now you can control your Lay-Z-Spa by both mobile device and control panel.
Sharing function
Note: Only one person can scan the Shared QR code generated each time. If you want to share it with other
devices, you must generate a new Shared QR code each time. The Shared QR code expires after 15 minutes.
The sharing function can only be used when users are in the same country.
Disconnect
Press the
button for 3 seconds until the Wi-Fi indicator flashes slowly.
Smart Hub
TM
Wi-Fi button
Connection Guide
TM
App from the Apple Store/Google Play Store.
on your pump for 3 seconds to begin syncing. The
20