Technical Data; Product Description; Installation; Rating Plate - tormatic T100 R Manual Del Usuario

3

Product description

Control elements
6
1 LED display
2 Door OPEN button
3 STOP button
Programming control elements
1
3
4
1 LED display
2 LED spot (confirmation of
the programming entry)

Rating plate

The rating plate is located at the side on the control housing. Ob-
serve the power supply specifications.
1
7
Made in Germany
6 5 4
1 Control type
2 Manufacturer and address
3 Supply voltage
4 Amperage
4 Door CLOSE button
5 Housing cover
6 1/2 open button
2
5
3 Up navigation button
4 Down navigation button
5 Programming button (Prog
button)
2
3
5 Max. motor power
6 Protection type
7 Rating plate no.

Technical data

Control unit
Rating plate no.
Height x width x depth
Cable feed-throughs
1
Supply voltage
2
Control voltage
3
External power supply
4
Max. motor power
Safety according to
EN 13849-1:
5
Protection type
Operating temperature
Manufacturer
4

Installation

Hazardous voltage
DANGER
The product runs on high voltage Before starting
with the installation,observe the following:
•
•
Follow the instructions as well as the illustrations in the
"Connection diagrams" chapter.
1. Tools required
For the assembly of the control, you require the following tools:
• wooden folding rule or tape measure
• cross-tip screwdriver Phillips; size 2
• drilling machine
• drill 6 mm
• Torx screwdriver, size T20
• slotted screwdriver for electricians
• spirit level
• marking pencil
2. Opening the control cover
Open the housing cover by either loosening the two screws on
the left or right on the cover.
T100 R
T100 R
15331560850
250 mm x 215 mm x 120 mm
Assembled vertically
6 x M20
2 x M16
2 x M20 V cutout
3N~ 400 V
3~ 230 V
24 V DC
max. 700 mA
Max. 3.0 kW
Input STOP A: Cat 2 / PL = C
Input STOP B: Cat. 2 / PL = C
Input STOP C: Cat. 2 / PL = C
IP 54 / CEE plug = IP44
+50 °C
-20 °C
Novoferm tormatic GmbH
Eisenhüttenweg 6
D-44145 Dortmund
www.tormatic.de
Have all work on electrical connections car-
ried out by a skilled electrician.
The power connection must be executed in
compliance with the mains voltage avail-
able.
EN - 19