7.1
Malfunctions
EN
158
Engine is not starting!
•
PTO shaft control lever not in starting position.
•
Choke in wrong position.
•
Fuel valve not opened.
•
Fuel tank empty or deposits in the carburetor.
•
Fuel hose or fuel filter clogged.
•
Spark plug socket not on spark plug.
•
Spark plug defective.
•
Fault on electrical system.
Engine running, but machine not moving!
•
Freewheeling lever in wrong position.
•
Not enough hydraulic oil.
Engine misfiring or suddenly stopping!
•
Fuel filter clogged.
•
Fuel tank empty.
•
Fuel valve closed.
•
Choke in wrong position.
•
Air filter or cooling air suction filter of the engine clogged.
•
Water in the water separator.
•
Fault on electrical system.
•
Temperature protection switch (optional) defective or engine too hot.
Engine running, but attachment unit is not being powered!
•
PTO shaft connection sleeve is not engaged.
•
PTO shaft control lever in starting position.
If you are unable to remedy the malfunction yourself, you must consult an authorized Rapid
dealer.
Note
Machine no. from CH 1001