IKEA SMAKLIG Manual De Instrucciones página 7

ENGLISH
Functions
BRIDGE MODE
+
By selecting the "Bridge Mode" button, you can combine two
+
cooking zones and use them at the same power by covering the
entire surface with a large pot or partially with a round/oval pot.
The function always remains on and, when using only one pot,
can be moved over the entire area. In this case, both left-hand
scroll keypads can be used indifferently. Ideal for cooking with
oval or rectangular pots or with pan supports.
To activate/deactivate the bridge + zone press the bridge
AUTOMATIC FUNCTIONS
Place the pot in position and select the cooking zone.
Press the automatic functions button. "
display.
The indicator for the special feature available for the cooking
zone will light up.
Press "ok" button to confirm, otherwise the special function
indicator will start blinking, waiting for the ok. The power level
during the special function is preset and cannot be modified.
To deactivate the automatic functions, press the "0" button.
• Melting
This function allows you to bring food to the ideal
temperature for melting and to maintain the condition of the
food without risk of burning. This method is ideal, as it does
not damage delicate foods such as chocolate, and prevents
them from sticking to the pot.
Troubleshooting
• Check that the electricity supply has not been shut off.
• If you are unable to turn the hob off after using it, disconnect
it from the power supply.
• If alphanumeric codes appear on the display when the hob is
switched on, consult the following table for instructions.
Display code Description
No Code You cannot activate or operate
TROUBLESHOOTING
the hob.
No Code The display does not react to the
• Check that the electricity supply has not been shut off.
touch.
• If you are unable to turn the hob off after using it, disconnect it from the
power supply.
• If alphanumeric codes appear on the display when the hob is switched on,
F0E1 Cookware is detected but it is
consult the following table for instructions.
not compatible with requested
operation.
DISPLAY CODE
Cookware is detected but it is not
compatible with requested operation.
F0E1
F0E7 Wrong power cord connection
Wrong power cord connection.
F0E7
F0EA The control panel switches off
The control panel switches off because
because of excessively high
F0EA
of excessively high temperatures.
temperatures.
F0E2, F0E4, F0E6, Disconnect the hob from the power supply.
F0E2, F0E4, F0E6, Disconnect the hob from the power supply.
F0E8, F0EC, F1E1, Wait a few seconds then reconnect the hob to the power supply.
F0E8, F0EC, F1E1, F6E1, Wait a few seconds then reconnect the hob to the power supply.
F6E1, F7E5, F7E6 If the problem persists, call the service centre and specify the error code that appears on the display.
F7E5, F7E6, F2E1 If the problem persists, call the service centre and specify the error code that appears on the display.
d E The hob does not switch heat up.
The hob does not allow a special
The functions do not come on.
e.g.
[when the hob is off]
function to be activated.
The hob does not allow a special
function to be activated.
e.g. :
The hob automatically sets a
e.g. The hob automatically sets a minimum
e.g.
minimum power level to ensure
power level to ensure that the cooking
[Power level lower
[Power level lower than
zone can be used.
that the cooking zone can be
than level requested]
level requested]
used.
SOUNDS PRODUCED DURING OPERATION
Induction hobs may whistle or creak during normal operation.
These noises actually come from the cookware and are linked to the
button
+
" will appear on the
A
DESCRIPTION
The cookware is not well positioned on
the cooking zone, or it is not compatible
with one or more cooking zones.
The power supply connection is not
exactly as indicated in "ELECTRICAL
CONNECTION" paragraph.
The internal temperature of electronic
parts is too high.
DEMO MODE on.
The power regulator limits the power
levels in accordance with the maximum
value set for the hob.
The power regulator limits the power
levels in accordance with the maximum
value set for the hob.
To download the full version visit www.ikea.com
• Keep Warm
This feature allows you to keep your food at an ideal
temperature, usually after cooking is complete, or when
reducing liquids very slowly. Ideal for serving foods at the
perfect temperature.
• Simmering
This function is ideal for maintaining a simmering
temperature, allowing you to cook food for long periods
with no risk of burning. Ideal for long-cooking recipes (rice,
sauces, roasts) with liquid sauces.
• Boiling
This function allows you to bring water to the boil and keep it
boiling, with lower energy consumption.
About 2 litres of water (preferably at room temperature)
should be placed in the pan, and left uncovered. In all cases,
users are advised to monitor the boiling water closely, and
check the amount of water remaining regularly.
NOTE: in case of activation of the power management at 2.5kW,
boiling function will not be available.
Please note: The presence of water, liquid spilled from pots or
any objects resting on any of the hob buttons can accidentally
activate or deactivate the control panel lock function.
Possible causes
There is residual water or
stains on the control panel.
Part of the display is covered
Please note: The presence of water, liquid spilled from pots or any
or the pots are placed too near
objects resting on any of the hob buttons can accidentally activate or
deactivate the control panel lock function.
to the display.
The cookware is not well
positioned on the cooking
zone, or it is not compatible
POSSIBLE CAUSES
with one or more cooking
Press On/Off button twice to remove the
zones.
F0E1 code and restore the functionality
of the cooking zone. Then, try to use the
cookware with a different cooking zone, or
The power supply connection
use different cookware.
is not exactly as indicated in
"ELECTRICAL CONNECTION"
Adjust the power supply connection
paragraph. according to "ELECTRICAL CONNECTION"
paragraph.
The internal temperature of
Wait for the hob to cool down before using
electronic parts is too high.
it again.
Follow the instructions in the "DEMO
The power regulator limits the
MODE" paragraph.
power levels in accordance
See paragraph "Power management".
with the maximum value set
for the hob.
The power regulator limits the
See paragraph "Power management".
power levels in accordance
with the maximum value set
for the hob.
These noises may vary according to the type of cookware used and to
the amount of food it contains and are not the symptom of something
EN
Solution
Clean and dry the control panel.
Remove the objects. Move the
pots away from the display. If the
problem persists wait 10 seconds.
Press On/Off button twice to
remove the F0E1 code and restore
the functionality of the cooking
SOLUTION
zone. Then, try to use the cookware
with a different cooking zone, or use
different cookware.
Adjust the power supply connection
according to "ELECTRICAL
CONNECTION" paragraph.
Wait for the hob to cool down
before using it again.
See paragraph "Power
management".
See paragraph "Power
management".
7