Installation and configuration of a UPS (Back-up) system
1 About this manual
The purpose of this manual is to describe the strategy of a UPS (Back-up) system, and the
system connection and configuration for start-up.
1.1 Recipients
This document is intended for qualified personnel.
The status of qualified personnel referred to in this manual will be, as a minimum, that which
meets all the standards, regulations and laws regarding safety applicable to the tasks of installing
and operating this unit.
Ingeteam recommends this unit to be installed by a professional installer.
1.2 Symbols
This manual uses various symbols to emphasize and highlight certain texts. The general
meanings are explained below.
General warning.
Electrical danger.
1.3 Safety
In order to install or handle the INGECON SUN EMS STORAGE 1Play, follow
the safety guidelines indicated in the installation manual for the INGECON SUN
STORAGE 1Play.
All applicable safety-related legislation for electrical work must be complied
with.
1.4 Waste handling
These units use components that are harmful to the environment (electronic cards, batteries or
cells, etc.).
At the end of the accessory's life, the waste must be correctly processed by an
authorized hazardous waste management company.
Ingeteam, in accordance with its policy of respect for the environment, will
inform the authorized manager, via this section, of the location of components
to be decontaminated.
All manuals and user guides at all-guides.com
General information.
Read the section indicated.
Ingeteam