Product Specifications - Permobil ROHO AGILITY Minimum/Mid Contour Back Support Instrucciones De Uso

Product Specifications

All measurements are approximate.
Adjustable Width (W) Fits Wheelchair Width Range - in. (cm):
13 to 14 (33 to 35.5) Width (W) measurements are taken from the outside of the back cane to the outside of the back
14 to 15 (35.5 to 38) cane.
15 to 16 (38 to 40.5)
Adjusting AGILITY to the smallest width within a wheelchair width range will result in ½ in. (1.5 cm)
16 to 17 (40.5 to 43)
loss of seat depth.
17 to 18 (43 to 45.5)
18 to 19 (45.5 to 48.5)
19 to 20 (48.5 to 51)
Note: The width measurement information above applies only when using the product with AGILITY Fixed Hardware or
AGILITY Quick Release Hardware. It does not apply when using the product with AGILITY Direct Mount Hardware. For
further information, refer to the instructions provided with AGILITY Direct Mount Hardware.
AGILITY Length (L) - in. (cm):
10 (25.5) Length (L) measurements are taken from the center edge to the center edge between the narrow and wide
13 (33.0) ends of the back shell.
16 (40.5)
Note: The cover assembly is not included in the length measurement.
18 (45.5)
20 (51)
Back Shell Depth Range (D) and Weight Range:
Depth Range Minimum Contour: 3 to 3½ in.; 7.5 to 9 cm
Depth Range Mid Contour: 3¾ to 4¼ in.; 9 to 11 cm
AGILITY Back Supports are measured for depth (D) with covers and with air inserts that are inflated to allow for ½ in. (1.5 cm)
of immersion. Measurements are taken from the center, front surface to the highest point of the contoured edge. Foam-only
models: Subtract ½ in. (1.5 cm) from the depth.
Weight Range Minimum Contour: 2.5 to 5.25 lb; 1.1 to 2.3 kg
Weight Range Mid Contour: 2.5 to 6.0 lb; 1.2 to 2.8 kg
Depths and weights are based on W x L in. (cm):
AGILITY Minimum Contour: 14 x 10 (35.5 x 25.5); 20 x 18 (51.0 x 45.5)
AGILITY Mid Contour: 14 x 10 (35.5 x 25.5); 20 x 20 (51.0 x 51.0)
Adjustable Back Air Insert (Minimum and Mid Contour)
Width (BW): 3 cells, 6.5 in. (16.5 cm)
Cell Depth (CD) when fully inflated: 1¼ in. (3 cm)
Length (BL)
# Cells 3 5
in. 6½ 10½ 12½
(cm) (16.5) (27) (32)
Perimeter included in width and length measurements: ¼ in. (1 cm)
Materials:
Back Shell: aluminum
Attaching Hardware: steel, aluminum, Zytel
Cover: spacer fabric front and back center panel, fluid-resistant back panels and flaps,
with hook and loop fasteners to secure the cover to the back shell. Refer to cover care
label for material content and for compliance to flammability requirements.
Foam Pad: polyurethane front; polyethylene back
Foam Insert: polyurethane
Air Insert: polyether polyurethane front; urethane-coated nylon back
AGILITY Lumbar Support Pad: polyurethane
Expected product lifetime: 5 years
ROHO AGILITY Minimum/Mid Contour Back Support Operation Manual
BW
6 7 8
BL
14½ 16½
(37) (42)
1 in. = 2.54 cm = 25.4 mm
Attachment Hardware and Accessories COMPATIBLE with AGILITY Minimum / Mid:
Refer to the instructions provided with the hardware or other accessory to determine
limitations or restrictions.
- ROHO AGILITY Back Support Quick Release Hardware
- ROHO AGILITY Back Support Direct Mount Hardware
- ROHO AGILITY UniTrack Rail
Not available in all markets; contact Customer Support:
- ROHO AGILITY Headrest Adapter Plate
- ROHO AGILITY Back Support Fixed Hardware
- ROHO AGILITY Lumbar Support Pad
- Therafin Headrest for ROHO AGILITY Back Support
- ROHO AGILITY Laterals
4
Shown with ROHO AGILITY Back Support
Quick Release Hardware
W
D
L