Clean The Mopping Module - Dreame D9 Manual Del Usuario

Routine Maintenance

Clean the Mopping Module

1. Press the two release clips on the side of water tank, remove the mopping
module and pull the mop pad off the mopping module.
2. Pour out the water in the tank. Clean with water only and leave to air dry
before re-installing.
Note: Do not use any cleaning agents or disinfectants.
14
3. Clean the mop pad with water only and leave to air dry before re-installing.
Note:
•
Remove the pad from the mopping module before cleaning it, and make sure dirty
water does not flow back into the water outlet to avoid clogging.
•
For optimal performance, it is recommended to replace the mop pad every 3 to 6
mouths.
4. If slow water flow occurs, or the volume is not well-distributed, please
clean the air hole in the cover of the water tank.
12
11 1
10 2
24 hrs
9 3
8 4
7 5
6