Connections; Determination Of The Flow Rate, The Pipe Diameter, And The Pressure Loss - GOK 500ERAZ Instrucciones Para El Montaje Y El Funcionamiento

CONNECTIONS

Inlet,
optional
Outlet,
optional

DETERMINATION OF THE FLOW RATE, THE PIPE DIAMETER, AND THE PRESSURE LOSS

Flow rate
The outlet pipe must be dimensioned pursuant to DIN 4755 in such a way that the mean flow
rate of the fuel oil is between (0.2 and 0.5) m/s. In the event of too large a pipe diameter with
low flow rates, undesired formation of gas bubbles may occur.
Determination of the flow rate w in m/s
⇒
Installation in
.
V
=
Volume flow rate
Operating medium
(L/h)
6 / 16
Single conduit filter and double conduit filter with plastic filter cup
Trading name and dimensions
acc. to standard
Screw-in fitting
• IG G 3/8, IG G1/2
For accepting a screw-in fitting with O-ring
• Compression fitting RVS
• RVS 6, RVS 8
Universal connection set (UA):
• UA 8/10
Trading name and dimensions
acc. to standard
Male thread ball-cone connector
• thread AG G 3/8-KN
Screw-in fitting
• IG G 3/8, IG G1/2
For accepting a screw-in fitting with O-
ring
• Compression fitting RVS
• RVS 6, RVS 8
Single string
system
≈
Heat input
in kW / 10
Double string
system
=
Gear output of the
Oil burner pump
Installation notes
Installation notes
Conveyor Calculation
system
=
w = 0.3537 •
Delivery rate
ID=inner pipe
of the booster
diameter (mm)
pump
Part no. 13 852 51 a
.
/ ID
2
V