Fuel Oil Consumer Installation Decommissioning; Disposal; Technical Data; Conformity - GOK 500ERAZ Instrucciones Para El Montaje Y El Funcionamiento

FUEL OIL CONSUMER INSTALLATION DECOMMISSIONING

For the decommissioning of fuel oil consumer installations, proceed as follows:
• Switch the operation and heating main switch off
• Close the oil shut-off device
If both sides of the line are blocked, the pressure may rise due to temperature-related
changes in the volume of the fuel oil.
For decommissioning in seasons with a risk of frost, the fuel oil consumer installation should
be properly emptied.

DISPOSAL

In order to protect the environment, products contaminated with water-
hazardous substances or that have come in contact with such substances
must not be disposed of in the domestic waste, to public waters or channels.
The product must be disposed of via local collection stations or a recycling station.

TECHNICAL DATA

Maximum admissible pressure
Maximum admissible pressure
Maximum admissible pressure
Ambient temperature
Temperature of the operating media
Housing material

CONFORMITY

ÜHP according MVV TB C 2.15.23 according EN 12514-2
Construction product for flood and risk areas

WARRANTY

We guarantee that the product will function as intended and will not leak during
the legally specified period. The scope of our warranty is based on Section 8 of
our terms and conditions of delivery and payment.

TECHNICAL CHANGES

All the information contained in this assembly and operating manual is the result of product
testing and corresponds to the level of knowledge at the time of testing and the relevant
legislation and standards at the time of issue. We reserve the right to make technical changes
without prior notice. Errors and omissions excepted. All figures are for illustration purposes
only and may differ from actual designs.
14 / 16
Single conduit filter and double conduit filter with plastic filter cup
PS 6bar
PS 10bar
PS 16bar
-20°C to +60°C
-20°C to +60°C
die-cast zinc ZP0410
Part no. 13 852 51 a