Skoda 565 071 606 Manual Del Usuario página 13

Front bumper spoiler
The accessories are intended for professional fitting. ŠKODA AUTO recommends that they are
fitted by a contractual partner.
The front bumper spoiler is manufactured from polyurethane (PUR). When it is supplied to
ŠKODA AUTO, this component has already been surface treated with silver paint (REFLEX
SILVER U34 paint). The black decorative trims are manufactured from polypropylene (PP).
The front bumper spoiler (hereafter simply referred to as "spoiler") with
order no. 565 071 606 is designed for the KODIAQ SCOUT. This is a spare part that can be
used to replace the original component if it is damaged.
Component index for the spoiler set 565 071 606 (fig. 1)
Component
Spoiler
Fitting instructions
Note:
The adhesive sealant and the required activator are not included in the set and must be
ordered separately in accordance with the workshop's practices.
From the Dow range:
Betalink K2 adhesive sealant (B)
Betaprime 5600 activator (C)
Betawipe 4000 activator (D)
From the ŠKODA Original Accessories range:
3M 4298 UV activator (E)
Tool list
Terostat 8550 cleaning agent (Henkel)
Sandpaper (grit 80)
Mirlon VF (wine red)
Body tape
3M applicator roller
Important fitting information
Please note: When adhering the components, use the dimensions
provided in the instructions to determine the size of the gap that
should be left between components. However, it is more important
that the gaps look right (i.e. that they are symmetrical and even all
the way along).
Please note: The vehicle must be completely clean before the compo-
nents are adhered.
Quantity
1
1
order no. HHA 381 017
Item
A
13
EN