Assembly Instructions - Sportplus SP-INV-010 Manual De Instrucciones

6. ASSEMBLY INSTRUCTIONS

• Remove all packaging.
• Check for the presence of all parts and for transport damage before starting
assembly.
Step 1: BASE FRAME ASSEMBLY
22
31
32
1
• Attach the front bottom tube (1) to the left front base frame (9L) and to the right front
base frame (9R) using 2 bolts (32).
• Repeat these steps for the rear bottom tube (1) and rear base frames (8L/8R).
• Insert the end caps (31) into both ends of the front and rear bottom tube (1).
• Fasten the cross bar (12) to the front base frame (9L/R); use 4 bolts (22), 2 base
plates (54), 4 washers (19), and 4 nuts (21).
• Unfold the front base frame (9L/R) from the rear base frame (8L/R).
• Insert the lock pin (26) through hole on the right side of the base frame.
• Tighten all bolts.
28
SP-INV-010-INT-IM-V05.indb 28 SP-INV-010-INT-IM-V05.indb 28
26
9R
54
19
21
21
19
21
12
21
19
32
8R
9L
19
54
22
31
32
31
8L
31
1
32
02/08/2021 3:39:51 pm 02/08/2021 3:39:51 pm