Sportplus SP-INV-010 Manual De Instrucciones página 31

Step 4: BODY HEIGHT ADJUSTMENT TUBE AND ROLLERS
52 53
4
• Fasten the footrest (4) to the body height adjustment tube (3); use 3 bolts (51) and
3 flat washers (19).
• Pull out the adjustable support tube (5) and select the desired position. Make sure
that the preinstalled spring (16) has not been removed from its original position.
• Insert the quick lock (37) into the threaded hole on the body height adjustment
tube (3) and fasten.
• Insert the rear leg tube (10) into the large hole of body height adjustment tube (3).
Make sure that the slots are aligned with the quick lock (37). To fasten, use
1 screw (40), 1 sleeve (39), 1 washer (19), and 1 nut (21).
• Slide 1 steel heel holder bracket (53) and 1 rubber rear heel holder (52) onto one
end of the rear leg tube (10) until the lock tooth is wedged into the slot in the leg
tube (10), as illustrated.
• Use the same procedure to attach the other steel heel holder bracket (53) and
rubber rear heel holder (52) onto the other end of the leg tube (10).
• Slide the foam leg rollers (13) over the support tube (5).
• Tighten all bolts.
SP-INV-010-INT-IM-V05.indb 31 SP-INV-010-INT-IM-V05.indb 31
13
5
21
51
19
19
51
37
19
10
39
3
13
40
52
53
31
02/08/2021 3:39:52 pm 02/08/2021 3:39:52 pm