Battery Check - Greenlee 93-603 Instrucciones De Operacion, Mantenimiento Y Seguridad

Battery Check

1. Plug the black test lead into the COM input terminal, and plug the red test lead into the
VΩBAT input terminal.
2. Set range selector to the appropriate BATT TEST range.
Note: To measure the voltage of a 1.5-volt battery, set the range selector to 1.5 V BATT TEST.
To measure the voltage of a 9-volt battery, set the range selector to 9V BATT TEST.
3. Touch the red test probe to the positive (+) terminal of the battery, and touch the black test
probe to the negative (–) terminal of the battery.
4. Read the display.
Note: The voltage on the display is the voltage of the battery under load. The load current for
the 9V battery is approximately 9 mA. The load current for the 1.5V battery is
approximately 150 mA. The display value corresponds with the battery's residual
voltage.
14
All manuals and user guides at all-guides.com