Panasonic CW-XC145HU Manual Del Usuario página 14

5. Pull each Frame curtain fully to each window
sash track, and pull the bottom window sash
down behind the Top retainer bar until it
meets.
6. Attach each Frame curtain the window sash
by using screws (Type C.) (See Fig. 9)
7. Slide the unit into the cabinet.(See Fig. 10)
CAUTION: For security purpose, reinstall screws
at cabinet's sides.
8. Cut the Foam-strip to the proper length and
insert between the upper window sash and
the lower window sash.(See Fig. 11)
9. Attach the Window locking bracket with a
screw (Type C.) (See Fig. 12)
10. Attach the front grille to the cabinet by
inserting the tabs on the grille into the tabs
on the front of the cabinet. Push the grille in
until it snaps into place.(See Fig.13)
11. Lift the inlet grille and secure it with two
screws (Type A) through the front grille.(See
Fig. 13)
NOTE: Please refer to p.7 for setting ventilation
kit.
12. Window installation of room air conditioner is
now completed. See ELECTRICAL DATA for
attaching power cord to electrical outlet.
Screw
14
Fig. 9
Power Cord
Screw
Fig. 10
Foam-Strip
Fig. 11
Window locking
bracket
Fig. 12
Fig. 13
Fig. 14