After Use - MESTO MAXIMA 3238 Instrucciones De Uso

GB IRL
can be read-off from the graduated window (most conveniently from inside to outside
Recommendation for mixing the spray liquid.
• Screw down the screw cap into the tank as far as it will go
• Release the pump handle by pushing downwards and then turning to the left.
• Generate pressure in the tank, max. 3 bar (red line on the piston-type pressure gauge,
. The safety valve integrated into the piston-type pressure gauge prevents excess
pressure build-up.
• Lock the pump handle
supplied with the sprayer.
Use
• Before use press discharge valve and hold spray lance vertically upright to let air out of
disharge equipment. This will assure perfect operation of sprayer.
• See Fig. 12a or 12b for options on how to carry your sprayer.
• Make sure you have the correct spray pressure (1.5 – 2.5 bar)
• Squeeze the lever on the discharge valve to start spraying

After use

• Do not dispose of residual liquid down the drain
Observe the information issued by the spray medium manufacturer.
• Depressurize. Pull up the knob from the safety valve until air stops blowing (
• Now remove the screw cap from the tank and place it in the holder
• Wipe the sprayer with a damp cloth.
Collect and dispose of the residual liquid according to all applicable laws, require-
ments and regulations. Observe the instructions of the substance manufacturer!
• To dry and store the tank, leave it open in a dry, shaded and frost-proof environment
Clean the protective equipment and yourself every time after usage.
AUS USA
15
NZ CDN
or placed inside the cap
.
.
IND
.