Sonoff DUALR3 Manual Del Usuario página 14

SONOFF TECHNOLOGIES CO., LTD.
4. Power on
After powering on, the device will enter the bluetooth pairing mode during the first use.
The Wi-Fi LED indicator changes in a cycle of two short and one long flash and release.
The device will exit the bluetooth pairing mode if not paired within 3mins. If you
want to enter this mode, please long press the manual button for about 5s until the
Wi-Fi LED indicator changes in a cycle of two short and one long flash and release.
5. Add the device
Tap "+" and select "bluetooth pairing" , then operate following the prompt on the APP.
Compatible Pairing Mode
If you fail to enter Bluetooth Pairing Mode, please try "Compatible Pairing Mode "
to pair.
Long press Pairing button for 5s until the Wi-Fi LED indicator changes in a cycle of
two short flashes and one long flash and release. Long press Pairing button for 5s
a g a i n u n t i l t h e W i - F i L E D i n d i c a t o r fl a s h e s q u i c k l y. T h e n , t h e d ev i c e e n t e r s
Compatible Pairing Mode.
For Android system:
Tap "+" and select "Compatible Pairing Mode " on app，Please follow the app prompts.
S2 S1
1
2
N In L In L In L
Out
2 L
Out
1
Bluetooth Pairing
Available for bluetooth
connection.
13
Add Device
Quick Pairing
WIFI devices can be added in this mo
de(make sure the device is in pairing
mode).
Scan QR code
GSM devices and devices with QR co
de can be added in this mode.
English