Data.OUt." / "Com. Sbi" Menu; Data.OUt." / "Prnt.PAr." Menu - Sartorius Entris II Essential BCE Serie Manual De Instrucciones

System Settings
7.3.6

"DATA.OUT." / "COM. SBI" Menu

Parameter Setting values
COM. OUTP. IND.NO*
IND.AFTR
AUTO.W/O
AUTO W/
STOP.AUT. OFF*
ON
AUTO.CYC. EACH.VAL*
AFTER 2
INTERV.
FORMAT 22CHARS*
16CHARS
EXTR.LIN.
AUTO.TAR. OFF*
ON
* Factory setting
7.3.7

"DATA.OUT." / "PRNT.PAR." Menu

Parameter Setting values
ACTIVAT. MAN. NO
MAN.AFTR*
INTERV.N.
INTERV.A.
AUTO.LC
FORMAT 22CHARS*
EXTR.LIN.
* Factory setting
26 Entris BCE Operating Instructions
®
Explanations
Activates the manual data output without stability.
Activates the manual data output after stability.
Activates the automatic data output without stability.
Activates the automatic data output after stability.
Deactivates the option to abort the automatic data output.
The automatic data output is aborted by pressing the [Print] button or a
software command.
Starts the automatic data output with a cycle after each value.
Starts the automatic data output with a cycle after every 2nd value.
The output rate can be set from 0 - 9999 seconds under "INPUT/INTERV.".
The data output provides 22 characters per line (16 characters for the mea-
sured value and 6 characters for identifiers).
The data output provides 16 characters per line for the measured value.
The data output provides an additional line with the date, time, and weight
value.
Deactivates automatic taring after data output.
The device automatically tares after data output.
Explanation
Manual without stability: The print process can be started manually at any
time.
Manual after stability: After pressing the [Print] button, the print command
is only executed once stability is achieved.
The output rate can be set from 0–9999 seconds under "INPUT/INTERV."
once stability is achieved.
The output rate can be set from 0–9999 seconds under "INPUT/INTERV."
once stability is achieved.
Automatically at load change: The print process starts after every load
change.
The printer output prints 22 characters per line (16 characters for the mea-
sured values and 6 characters for identifiers)
The printer output prints an additional line with the date, time, and weight
value.