Pressure Adjusting Lever; Presser Foot Lifter; Thread Cutter; Extension Table - Sears Singer 384.18028300 Manual De Instrucciones

Tabla de contenido

Publicidad

Pressure
Adj
usting
Lever
(_ Pressure adjusting lever
The pressure adjusting lever should be set at "3" for regular
sewing.
Reduce the pressure to "2" for the applique, cut work, draw
work and basting.
Set the pressure at "1" when sewing the chiffon, lace,
organdy and other fine fabrics. Velour and knits with a lot of
stretch may also require the pressure at "1".
Presser
F oot Lifter
(_ Presser foot lifter
Normal up position
Highest position
The presser foot lifter raises and lowers the presser foot.
You can raise it about 1/4" (0.6 cm) higher than the normal
up position for easy removal of the presser foot, or to help
you place heavy fabric under the foot.
S
S
!
r
Y
J
Th read Cutter
(_ Thread cutter
You do not need a pair of scissors to cut the thread after
sewing. Simply use the built-in thread cutter.
Extension
Table
• Detaching the table
Pull the table away from the machine, as illustrated, for
"free-arm" sewing of the cuffs and sleeves.
• Attaching
the table
Push the extension table until it snaps into the machine.
Extension table
Pin
Holes
_Tab
Free-arm
• Accessory
box
Open the cover of the accessory box toward you. The
sewing accessories are conveniently located in the box.
8
J
J

Publicidad

Tabla de contenido
loading

Tabla de contenido