Buttonhole; Stitches; Automatic Buttonhole; Preparation For Sewing - Sears Singer 384.18028300 Manual De Instrucciones

BUTTONHOLE STITCHES
Automatic Buttonh ole
(_ Stitch selector:
Stitch width:
Stitch length:
Needle thread tension:
(_ Presser foot R:
_](BH)
3 to 6.5
_,,_II_,,,_, zone
2t06
Automatic buttonhole foot
• Preparation for sewing
Groove
Pin
Attach the automatic buttonhole foot R. Make sure the
groove on the foot holder catches the pin on the foot when
lowering the presser foot.
S
f
®
WIDTH
LENGTH _ (_
®
• Tosew
Button holder
Buttonhole lever
The buttonhole size is automatically set by placing the
button in the rear of the automatic buttonhole foot.
The button holder on the foot takes a button up to 1.0"
(2.5 cm) in diameter.
Make a test buttonhole on an extra piece of the fabric to
check your settings.
Use interfacing on stretch fabrics.
Pull the button holder _ to the back, and place the
button in it. Push it forward tightly against the button.
Pull the buttonhole lever @ down as far as it will go.
[]
[]
J
J
58