Publicidad
T-Connector Wiring Kit
INSTALLATION INSTRUCTIONS
1. Read instructions thoroughly before beginning.
2. Open the rear hatch of the
vehicle and remove the rear
threshold, cargo net and cargo
cover (Fig. 1A).
3. Carefully pull back the left
(driver's) side interior trim panel
(Fig. 1B).
4. Locate the vehicle's trailer wiring connector behind the
trim panel. This will be a white
connector similar to that found
on the T-Connector harness
(Fig. 2).
5. Ensure that the vehicle
connector is clean and free of
dirt. Plug the T-Connector end into the vehicle
connectors, ensuring that the locking tabs engage.
6. Locate a clean accessable mounting location on the
vehicle near the T-Connector's black box within reach of the
white wire and grounding eyelet. Drill a 7/64" hole.
Caution: Take care not to drill through the body or
any exposed surface.
7. Mount the white wire using the ground screw and eyelet
B
A
Fig. 1
Fig. 2
Publicidad
