Publicidad
Idiomas disponibles
Idiomas disponibles
5
23
3V
+
19
4
70
60. Light Activated LED
Assemble as illustrated. Use the photosensor
to control the LED
.
16
17
61. Water Activated LED
Remove the photosensor
. Wet your finger and put it on the touch plate
16
the LED
17
.
62. Water Activated Lamp
Remove the photosensor
and replace the LED
with the lamp
. Put water on the
16
17
18
touch plate
to control the lamp.
12
18
2.5V
63. Light Activated Lamp
Return the photosensor
to its original position and replace the LED
16
17
. Move your hand over the photosensor to control the lamp.
18
64. Manually Activated Light and Sound
Assemble as illustrated. Turn on the slide switch
flashes, and some weapon sounds are produced. Close the button switch
LED glows, the lamp flashes, and the weapon sounds are produced. Use both switches
together to make various sounds.
65. Magnetically Activated Light and Sound
to control
Replace the slide switch
with the reed relay
12
15
ton switch
respectively to control the light and sound. Use the reed switch
14
the button switch
together to make various sounds.
14
13
66. Light Activated Light and Sound
Replace the slide switch
15
with the photosensor
button switch
14
respectively to control the light and sound. Use the photosensor
and the button switch together to make various sounds.
with the lamp
16
and the LED
glows, the lamp
15
17
18
and the
14
23
. Use the reed switch
and the but-
13
13
and
13
67. Water Activated Light and Sound
16
. Use the photosensor
16
and the
Replace the button switch
14
16
your finger and put it on the touch plate
switch
15
and the touch plate
71
6
3V
+
2
19
3
2
with the touch plate
12
. Close the slide switch
15
or wet
12
to control the light and sound. Use the slide
12
together to make various sounds.
12
Publicidad
