Fimar H/220 Manual Del Usuario página 41

Table 2: Operating malfunctions
Problem
Cutting blade rotation speed
reduces and/or tends to stop
during operations.
Food product is not cut correctly
("torn" and/or irregular shape).
The cutting blade is not
correctly sharpened.
The carriage does not slide
evenly.
The stop button does not work. Electric drive circuit fault.
Causes
Transmission unit fault.
Cutting blade dull.
Cutting blade worn
The sharpening disks are worn.
Guide lubrication insufficient
- 13 -
H-HS-HL GRAVITY
SLICERS
Solutions
Use the specific turnbuckle
(under the base, next to the
motor) to tension the belt. If the
problem persists, contact your
dealer or authorised service
centre.
Sharpen the blade
Contact your dealer or
authorised service centre.
Replace the disks at the dealer
or at an authorised service
centre.
Lubricate the carriage guide.
Disconnect the power cord from
the electrical socket and contact
your dealer or an authorised
service centre.
English language
GB