Descargar Imprimir esta página

Legal Requirements; Intended Use; English - Scott Softcon Manual Del Usuario

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

  • MEXICANO, página 30
SCOTT SOFTCON
BODY ARMOR | VEST | JACKET | BACK PROTECTOR
INCLUDING P.P.E :
-BACK PROTECTOR (EN 1621-2 :2014)
-STONE SHIELD (EN 14021 :2003)
-SHOULDER AND ELBOW (EN 1621-1 :2012)
• I. INTRODUCTION
Congratulations on choosing this quality SCOTT product. Before use, please read the
following instructions carefully. Please keep these instructions in safe custody. This spe-
cific product line has been developed to offer you the best comfort and an engineered
fit.
• II. LEGAL REQUIREMENTS
These protectors are considered to be items of Personal Protector Equipment (PPE)
and as such are subject to the requirements laid down by the European directive
89/686/EEC. The CE marking may be allocated by SCOTT only once the protector has
undergone an "EC Type Examination" or "Certification Procedure" at a notified Euro-
pean body.
The protectors in this Information sheet undergo EC certification at a Notified Europe-
an Body, TÜV SÜD Product Service GmbH (NB 0123), TEC-Sport/ TF4, Daimlerstraße
11, D-85748 Garching bei München, Germany which certifies that our products meet the
requirements of directive 89/686/EEC.
BACK PROTECTOR
These SCOTT back protectors have been designed within the requirements of the
European safety standard EN 1621-2:2014 "Motocyclist's protective clothing against
mechanical impact - Part 2: Motorcyclists' back protector -Requirements and tests
method". The back protectors have been submitted to impact tests according to EN
1621-2:2014 and have been classified as type FB (= Full Back).
STONE SHIELD (BREAST/FRONT PROTECTOR) 
The front (or) breast protector has been submitted to tests according to the standard
EN 14021:2003.
ELBOW, FOREARM AND SHOULDER GUARDS 
The elbow, forearm and shoulder guards have been submitted to impact tests accord-
ing to EN 1621-1:2012 'E' and 'S' and have been classified as type A, Level 2.
• III. INTENDED USE
This protector is strictly limited for the respective use and temperatures indicated by
the pictograms on the approval label (see chapter VI. Info on product). The protector is
explicitly not to be used above or below indicated temperatures, nor for other kinds of
sports.(off road motocross).
• IV. USER RESTRICTIONS
APPLICATION AREA
The back, elbow and forearm protectors are designed and manufactured to provide
limited protection against impact in the event of a fall. The stone shields are designed

ENGLISH - 4

PRO_16_MANUAL_SOFTCON FAMILY_V3.indd 4
25.06.15 08:25

Publicidad

loading