Handle Positions - Cybex Platinum ATON Q Manual Del Propietário

HANDLE POSITIONS

The Handle has four LOCKED positions:
1. DRIVE and CARRY position
2. 1ST LOADING position
3. 2ND LOADING position
4. RESTING position
To move handle to a new position, squeeze BOTH Handle
a
Adjustment Buttons (one on each side) while rotating handle
BOTH Adjustment Buttons must be depressed at the same time in
order for the handle to move.
ALWAYS have the handle locked in the DRIVE/CARRY
position while using this child restraint in a vehicle.
ALWAYS verify that the handle is LOCKED in the drive/
carry position before lifting Infant Carrier by the handle.
An unlocked handle could move unexpectedly, causing
child to fall out.
ALWAYS keep your child properly secured in the
Harness even when using the carrier outside of the
vehicle.
NEVER hang toys or other objects from handle when
using child restraint in a vehicle as they could seriously
injure a child in a sudden stop or crash.
INTEGRATED CANOPY
Simply pull forward to extend the Aton Q Canopy. The Canopy has
four positions as shown.
To retract the Canopy, gently push it back into its original position.
USING THE INFANT CARRIER
b
.
2
1
3
b
a
4
18