Cybex Platinum ATON Q Manual Del Propietário página 8

Ocultar thumbs Ver también para ATON Q:
Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

WARNING!
!
secured in the vehicle seat and does
not move more than 1 inch (2.5 cm) in
any direction when checked at the belt
path.
• ALWAYS CHECK buckles and other
parts for hot surfaces. A hot surface
could burn your child! Cover an
unoccupied child restraint with a blanket
when leaving it in a vehicle exposed to
sunlight.
• ALWAYS CHECK to make sure the
Infant Carrier is securely attached to the
Base with Load Leg, each time you use
this restraint. After attaching the Infant
Carrier to the base, LIFT UP on the
Infant Carrier handle to make sure that
it is securely attached to the base.
• If using a base, ONLY USE with the
Aton Base 2.
• NEVER LEAVE an empty child
restraint unsecured in your vehicle.
7
DEATH or SERIOUS INJURY can occur
This restraint MUST ALWAYS BE
SECURED, even when not occupied.
An unsecured child restraint could
injure vehicle occupants in a sudden
stop or crash.
• If the LATCH connectors are NOT
BEING USED make sure they are
securely stored.
• DO NOT USE this child restraint
if it has been in a crash. There may
be hidden damage and it must be
replaced. Your insurance company may
provide some assistance in replacing
the child restraint.
• NEVER USE this child restraint when
it is older than six (6) years. The date
of manufacture can be found on a
label affixed to the bottom of the Infant
Carrier, as well as the Base.
• NEVER USE this child restraint if any
of the Harness or LATCH straps are

Publicidad

Capítulos

Tabla de contenido
loading

Tabla de contenido