Listo RDL 145-55b3 Instrucciones De Uso página 33

Frigorífico 2 puertas
Tabla de contenido

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

Problems
The appliance does not
cool down enough. The
food is too warm.
Unusual noises.
The compressor does not
start immediately after
changing the temperature
setting.
There is water at the back
of the appliance or on the
shelves.
If the information in this table does not help you solve your specific problem, do not
perform any repairs on the appliance yourself. Contact your retailer's after-sales
service department.
IMPORTANT: Repairs to your refrigerator should
only be carried out by qualified service technicians.
Improper repairs can lead to hazards for users and are
not covered by the warranty.
Possible causes
The temperature is not set
correctly.
The door stayed open too
long.
A large amount of hot
food has been placed in
the appliance in the past
24 hours.
The appliance is located
near a heat source.
The appliance is not
straight.
The appliance is touching
the wall or other objects.
Some noises are typical of
refrigeration appliances.
This is normal, it is not a
malfunction.
The
defrost
discharge
outlet
blocked.
33
Solutions
Please
refer
paragraph "Setting the
temperature".
Do not open the door
longer than necessary.
Temporarily
thermostat to a cooler
temperature.
overloading the inside of
the refrigerator.
Please
refer
"Installation
section.
Adjust the feet.
Move the appliance
slightly.
Refer to the "Noises when
running" section.
The compressor will start
after a while.
water
Refer to the paragraph
is
"Cleaning and maintenance".
to
the
set
the
Avoid
to
the
location"
V.1.0

Publicidad

Tabla de contenido
loading

Tabla de contenido