f
ixing A mAlfunCtion
A malfunction may be due to a minor problem that you can solve yourself using the
instructions in the following table. Before calling a technician, perform the following
checks:
Problems
The appliance is not wor-
king.
The appliance cools down
too much.
The interior lighting is not
working.
A large amount of frost is
forming; sometimes even
on the door seal.
V.1.0
TROUBLESHOOTING GUIDE
Possible causes
The thermostat is in the
"Off" position.
The plug is not plugged in
or is improperly plugged
in.
A fuse has blown or is de-
fective.
The electrical outlet is
defective.
The thermostat is set to
a temperature that is too
cold.
The bulb is defective.
Replace it.
The door seal is leaky (pe-
rhaps after reversing the
direction the door opens).
32
Solutions
Turn the thermostat to the
"5" position.
Plug the plug into the out-
let.
Check the fuse, and
replace it if necessary.
Repairs to the outlet should
be done by an electrician.
Temporarily
set
thermostat to a warmer
temperature.
Please
refer
"Changing
the
section.
Carefully heat the leaking
seal sections with a hair
dryer (set to cool). At the
same time, correct the
position of the door seal
with your hand.
the
to
the
bulb"