Sedus silent rush Instrucciones De Uso página 10

Tips for users
Correct use
This office swivel chair is designed
for a user weight of up to 120 kg
and may only be used for the pur-
pose intended while exercising due
care and attention. Using it inap-
propriately (e.g. as a stepladder,
sitting on the armrests or placing
extreme weight on one side) could
result in accidents.
Castors
Please remove the red or blue
transport protection before using
the product for the first time.
A variety of castors are available,
for the sake of your safety and for
use on different types of flooring in
accordance with safety regulations:
– Hard castors for soft flooring
(standard)
– Soft castors for hard floors are
optional
Changing castors: this might be
necessary, for instance, after
moving office, or after the instal-
lation of a new floor covering –
simply pull out the castors and
push new ones in.
Plastic parts
Soapy water is suitable for clean-
ing. Please do not use any
aggressive cleaning materials.
Upholstery
For light dirty marks, only clean the
cover material using fine washing
agents or using the cleaner sup-
plied by Sedus.
The seat and backrest can only be
replaced in the factory.
10 English
All manuals and user guides at all-guides.com
Leather
Leather is a natural product.
The natural markings of the
animal skin gives the material
its unmistakable texture.
Rub off light soiling with a soft
woollen cloth. Heavier soiling
should only be treated with
cleaners designed for aniline-
dyed leather.
Do not expose semi-aniline
leather to direct sunshine.
Neck support pad
The neck support pad can be remo-
ved so it can be cleaned or repla-
ced. To do this, compress the neck
support pad at the front and back
simultaneously, by pressing
together the bottom four corners,
and push it upwards about 3 cm,
until the pad comes loose. To refit
it, place the neck support pad on
the four guide-pins, push against
the back pad at all four corners and
then push down.
Arm-rest pads
If required, the arm-rest pads can
be replaced by our Customer Service
department.
Seat height adjustment
We recommend cleaning the
piston rod regularly with a cloth.
Other work on the gas spring,
e.g. replacement, may only be
carried out by trained staff.