List Of Parts; Using The Brake - Cosatto TO & FRO NITTY GRITTY Manual Del Usuario

Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

A basket is provided for the carriage of goods, evenly distributed, up to a maximum weight of 2kg.
Rear pocket on hood - maximum weight 0.2kg.
Plastic cup holder - maximum weight 0.5kg.
Never leave raincovers on indoors, in a hot atmosphere or near a heat source as the baby
could overheat.
Ensure all users are familiar with the products operation. It should always open and fold easy.
If it does not, do not force the mechanism - stop and read the instructions.
Do not use your pushchair in a manner for which it is not designed.
Do not allow your child to climb unassisted into, play with or hang onto your pushchair.
Do not use a platform with this pushchair as it may render the pushchair unsafe.
Always apply the brakes when the pushchair is stationary. Hold on to your pushchair when
close to moving road vehicles or trains. Even with the brake on the draught from the vehicle
may move the pushchair.
Exercise caution when mounting or dismounting a kerb. Remove your child and fold the push
chair when ascending or descending stairs or escalators.
Ensure the folded pushchair is stored away from children so that it does not fall and cause injury.
Never carry a second child on your pushchair.
This product complies with BS EN 1888:2012.
car seat (sold separately)
When car seat is used in conjunction with the chassis, this product does not replace a cot or a
bed. Should your child need to sleep, then it should be placed in suitable cot, bed or carry cot.
Cosatto recommend that the child should always be facing the parent when the car seat is fitted
to the chassis.
operation
(see illustrations further on in this booklet)

1 - list of parts

Your pushchair is supplied in one carton and contains:
1. Pushchair (basket & chest pad attached, head pad inserted)
2. Footmuff (Wedge inserted)
3. Headhugger
4. Hood
5. Raincover
6. Plastic drinks holder
7. Changing bag (If specified)
8. Child car seat mounting adaptors
2 - opening the pushchair
To open the pushchair, first release the autolock (a) which holds the pushchair in the umbrella
position. Now holding the pushchair by its handles, gently lower the front. To complete the
operation, press hard on the pedal (b), until you hear the 'click' from the secondary locking bar (c).
WARNING: Ensure that all locking devices are engaged before use.

3 - using the brake

To apply the brake, press either lever down firmly with your toe (a) until a 'click' is heard. Test the
brake is engaged correctly by trying to push the pushchair forwards for a short distance. To release
the brake, raise either of the levers (b).
NOTE: Always apply brake before placing and removing a child from the pushchair.
All manuals and user guides at all-guides.com

Publicidad

Tabla de contenido
loading

Tabla de contenido