Placing The Slings - Hip Support Sling With The Standing Sling - Guldmann 28336 Manual Del Usuario

All manuals and user guides at all-guides.com
8 .00 Placing the slings – Hip Support Sling with the Standing Sling
Attachment of the hip support straps
The support straps are looped at one end
and have a buckle at the other. Thread the
looped end through the gate on the boom
and attach over the push handle bar as
seen on the illustration below. The strap is
ready for use.
Note: Label must be facing away from the
user.
Before fitting the standing sling ask the
user to lean forward and introduce the hip
support sling. This should be positioned
at the base of the spine either side of the
hips. Fit the standing sling as previously
described.
Introduce the lifter. Caution must be
exercised to the foot plate when near
user's feet.
Place the user's feet onto the foot plate
and adjust the knee pad - the top of the
knee pad should be level with the top of the
shin two fingers below the knee joint.
Optional – if the user has a tendency to
have involuntary movements you can use
the calf strap to ensure the user's feet do
not come off the foot plate. If the calf strap
is not in use fasten the strap to the back of
the knee pad (avoiding loose straps).
23