Guldmann 28336 Manual Del Usuario página 24

All manuals and user guides at all-guides.com
Attach the hip support sling to the straps
snapping the buckle together. Raise the
lifting boom to gain tension on both slings
– Ensure that the sling is secure and
attached before continuing with the lift.
Adjust the hip support straps through the
buckle and continue. The hip support sling
should tension before the standing sling,
– if it does not, then lower the user and
readjust one or both slings.
As the lift progresses at approximately 60%
into the standing procedure the hip support
sling will loosen and once in standing the
sling will be redundant allowing access to
lower garments. Communication should be
maintained throughout the lifting procedure.
Alternatively you have the option to attach
the standing sling onto the lower hooks,
this will facilitate an alternative lifting posi-
tion and is more suitable for the shorter
user.
When placing the user back into a seated
position push the lifter up to the chair/com-
mode chair/toilet and position the user so
his/her calf is parallel to the chair/commode
chair/toilet.
Begin to lower and at approximately 40%
into the lowering procedure re-apply the hip
support sling and continue to lower. The
sling will ensure correct seated position.
To remove the sling carry out the fitting
instructions in reverse order, taking care to
peel the sling away from the user avoiding
skin friction and movement.
Alternatively: The Active Micro Plus sling
can be used with the active lifter – for
instructions see separate user guide for
Active Micro Plus Sling.
24