Description Of Operation - Stihl MSA 160 C Manual De Instrucciones

Ocultar thumbs Ver también para MSA 160 C:
Tabla de contenido

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

  • MEXICANO, página 150
STIHL recommends that maintenance
and repair work be carried out only by
authorized STIHL dealers. STIHL
dealers receive regular training and are
supplied with technical information.
Use only high-quality spare parts. in
order to avoid the risk of accidents or
damage to the machine. Contact a
servicing dealer if in doubt.
STIHL recommends the use of genuine
STIHL spare parts. Such parts have
been optimized for the machine and the
user's requirements.
Never modify the machine in any way –
this can be extremely dangerous – risk
of accident!
Periodically check electrical contacts,
power cord and power plug of the
charger for undamaged insulation and
aging (brittleness).
Electrical components, e. g., the power
cord of the charger, may only be
repaired and/or replaced by qualified
electricians.
Inspect chain catcher – replace if
damaged.
Observe sharpening instructions – for
safe and proper handling, always keep
the chain and guide bar in flawless
condition. Keep the chain properly
sharpened, tensioned and well
lubricated.
Change chain, guide bar and chain
sprocket in due time.
Always store chain oil in the specified
type of containers and ensure they are
correctly labeled.
MSA 160 C
All manuals and user guides at all-guides.com
In the event of a chain brake
malfunction, switch off the machine
immediately and remove the battery –
risk of injury! Consult a servicing dealer
– do not use the machine until the
malfunction has been remedied, see
"Chain Brake".
Clean plastic parts with a cloth. Harsh
detergents can damage the plastic.
Check fastening screws on deflectors
and cutting attachments to ensure that
they are firmly seated and retighten if
necessary.
Cleaning ventilation slots in motor
housing as needed.
Keep the guide grooves clean – clean if
necessary.
The machine must be stored in a dry
room with the hand guard set to ƒ and
only with the battery removed.

Description of Operation

The power tool is operated with a
rechargeable battery. Use only STIHL
chargers to recharge the battery.
Data exchange
The power tool, battery and charger
communicate with each other. The
charger charges the battery and the
battery supplies the necessary power
only if data exchange functions properly.
For this reason you should operate your
power tool only with the approved STIHL
batteries and STIHL chargers.
English
63

Publicidad

Tabla de contenido
loading

Tabla de contenido