Functional Description; Operation - Aqualytic AL100 Instrucciones

Functional description

GB

Operation

On
Switch the unit on using the [ON/OFF] key.
Off
METHOD
The display shows the following:
Select the required test using the [MODE] key.
Mode
Scroll Memory (SM)
To avoid unnecessary scrolling for the required test method, the instru-
ment memorizes the last method used before being switched off. When
the instrument is switched on again, the scroll list comes up with the
last used test method first.
The display shows the following:
METHOD
Fill a clean vial with the water sample up to the 10 ml mark, screw the
cap on and place the vial in the sample chamber making sure that the
Zero
Press the [ZERO/TEST] key.
Test
The "Method" symbol flashes for approx. 8 seconds.
METHOD
The display shows the following:
0.0.0
After zero calibration is completed, remove the vial from the sample
chamber. The characteristic coloration appears after the addition of
the reagents.
Replace the cap on the vial and place in the sample chamber making
sure that the
Press the [ZERO/TEST] key.
Zero
(For Countdown/reaction period see page 25)
Test
METHOD The "Method" symbol flashes for approx. 3 seconds.
The result appears in the display.
RESULT
The result is saved automatically.
Repeating the test:
Zero
Press the [ZERO/TEST] key again.
Test
Repeating the zero:
Zero
Press the
Test
24
All manuals and user guides at all-guides.com
marks are aligned.
marks are aligned.
[ZERO/TEST] key for 2 seconds.
AL100_7 07/2016