Menu Options; Menu Selections; Recall Of Stored Data; Transmitting Stored Data - Aqualytic AL100 Instrucciones

Menu options

GB

Menu selections

Press the [MODE] key and hold.
Mode
Switch the unit on using the [ON/OFF] key.
On
Allow the 3 decimal points to be displayed before releasing the
Off
[MODE] key.
!
The [!] key allows for selection of the following menu points:
1
Store Date
2 1
1
3 4
Time Cal 2
4
The selected menu is indicated by an arrow in the display.
Store Date
diS
1
Time Cal
After confirming the selection with the [MODE] key the photometer
shows the last 16 data sets in the following format (automatically
Mode
proceeds every 3 seconds until result is displayed):
Number
Year
Date
Time
Test
Result
Zero
The [ZERO/TEST] key repeats the current data set.
Test
The [MODE] key scrolls through all stored data sets.
Mode
!
Quit the menu by pressing [!] key.
Store Date
Prt
1
Time Cal
Note: To print data, or to transmit to a PC, the optional IRiM (Infrared
Interface Module) is required.
The IRiM Module and the connected printer/PC must be ready. Press
the [MODE] key to start the transmitting, the instrument displays
"PrtG" (Printing) for approx. 1 second followed by the number of the
first data set and its transmission. All data sets will be transmitted one
after the other. After finishing the instrument switches to test mode.
PrtG
The print job can be cancelled by pressing the [On/Off] key. The
instrument switches off.
On
Off
30
All manuals and user guides at all-guides.com
diS recall stored data
Prt printing stored data
setting the date and time
3
user calibration
diS – Recall of stored data
1
n xx (xx: 16...1)
YYYY (e.g. 2014)
mm.dd (monthmonth:dayday)
hh:mm (hourhour:minuteminute)
Method
x,xx
Prt – Transmitting stored data (to Printer or PC)
1
AL100_7 07/2016