Publicidad
Step 5
Turn four BLACK 9/16" FLAT HEAD SCREWS (32S) into the
å
BACKS (F and N) until the shoulders of the SCREWS rest on
the surfaces of the BACKS.
NOTE: Do not overtighten the SCREWS.
å
Slide the BACK MOLDINGS (K and Q) onto the BACKS (F
å
and N). Line up the grooves in the MOLDINGS over the
heads of the SCREWS in the BACKS.
NOTE: If the MOLDING comes up off of the SCREWS,
å
remove it and slide it on again.
NOTE: The MOLDINGS should be centered
å
on the BACKS.
Page 10
F
Q
Apply pressure with your hands
as you guide the MOLDINGS over
the SCREWS and onto the ENDS.
N
K
BLACK 9/16" FLAT HEAD SCREW
Shoulder
421934
32S
(4 used in this step)
www.sauder.com/services
Publicidad
