Publicidad
Step 1
Assemble your unit on a carpeted fl oor or on the empty
å
carton to avoid scratching your unit or the fl oor.
To begin assembly, push a SAUDER TWIST-LOCK®
å
FASTENER (12F) into the large holes in the ENDS (A and B).
Repeat this step for the UPRIGHTS (D and E), BOTTOMS (C
å
and O), and BACKS (F and N).
Do not tighten the TWIST-LOCK® FASTENERS in this step.
12F
(24 used)
Page 6
A
421934
Look for this icon. It means a
video assembly tip is available at
www.sauder.com/services/tips
If you purchased
Hutch, assemble
B
STOP
the 420654
that unit fi rst.
www.sauder.com/services
Publicidad
