Publicidad
Step 13
Fasten the EXTENSION BLOCKS (T) to the UPRIGHTS (D and E). Use four BLACK 1-1/4"
å
FLAT HEAD SCREWS (7S).
Fasten the remaining two NARROW EXTENSION RAILS (CC) to the UPRIGHTS (D and E).
å
Use four GOLD 5/16" FLAT HEAD SCREWS (3S) through holes #1 and #3.
NOTE: For each NARROW EXTENSION RAIL, turn a SCREW into the hole shown in the
å
enlarged diagram. Then, slide the inner cartridge of the NARROW EXTENSION RAIL in to
fi nd the other hole that lines up with the hole in the UPRIGHTS. Turn a SCREW into this hole.
2
1
CC
T
Open end
Page 18
GOLD 5/16" FLAT HEAD SCREW
(4 used for the RAILS)
Surface with
more holes
Unfi nished
strip
4
3
E
3S
Open end
1
2
3
CC
4
T
D
The large hole
must be here.
421934
7S
BLACK 1-1/4" FLAT HEAD SCREW
(4 used for the EXTENSION BLOCKS)
www.sauder.com/services
Publicidad
