Measure/Supply Volts Or Mv - Baker Hughes Druck DPI 880 Manual Del Usuario

output values to the system (Table 7).
Maximum: 30V
Figure 1: Example configuration - To measure/supply mA with
external loop power (Area
Figure 2: Example configuration - To supply mA with internal
loop power (Area
6
- [EN] English
Edit
b) Supply
a) Measure
 )
Edit
 )
Settings
Figure 3: Example configuration - To measure mA (Dual

Measure/supply Volts or mV

To measure/supply Volts or mV:
1. Connect the instrument (Figure 4/5) and, if necessary,
adjust the Set Up (Table 1).
2. Select the task from the task selection menu (Table 2/3).
Note: Use the Dual Function area (
the same time. If the area
this area to off (). This saves the battery power.
3. If necessary, adjust the Settings (Table 4/5) and/or the
output values to the system (Table 7).
Settings
Figure 4: Example configuration - To measure/supply Volts or
Maximum: 30V
a) with external loop b) with internal loop
power
 )
Function, area
 ) to do two operations at
 selection is not necessary, set
0 to ±30V OR
0 to ±120mV
a) Measure
mV (Area  )
power
0 to 12V OR
0 to 120mV
Edit Settings
b) Supply
K0405 Revision B