Presentation; Technical Description - Satelec SUPRASSON P5 NEWTRON Manual Del Usuario

All manuals and user guides at all-guides.com
III - PRESENTATION

3. 1 PRESENTATION

The S P5 N is composed of three
®
UPRASSON EWTRON
main parts:
- a control unit (Figure 1, ref. 1)
- a footswitch (Figure 1, ref. 2)
- a cord with a connector for the handpiece
(Figure 1, ref. 3)
The S P5 N control unit has a
®
UPRASSON EWTRON
rotary potentiometer on the top with the marking
OI (On/Off) and marked 1 to 20 (power levels).
Various connections are to be found at the rear of
the unit:
- 1 mains cord (fixed) with earth pin (Figure 2,
ref. 1)
- 1 footswitch cord (fixed)(Figure 2, ref. 2)
- 1 tube (Figure 2, ref. 3), equipped with a filter
system (Figure 2, ref. 4), for connecting to the
water supply.
- 1 Team-up socket (optional equipment) (Figure
2, ref. 5). This equipment comes with its own
instructions.
- Tap for adjusting the water flow (Figure 2, ref.
6).
On the right is the scaler cord (fixed) with a
connector for the handpiece (Figure 5, ref. 4).
There is a support located above the cord for the
handpiece connector.
8
There are air vents on the rear and lower panels
of the device.
In order to maximize air flow, the device rests on
4 rubber feet, keeping the lower air vents clear.
Accessories: the S N
UPRASSON
and tips come with their own instructions.

3. 2 TECHNICAL DESCRIPTION

a) Upper panel of the control unit
The rotary potentiometer (Figure 3, ref. 1) on the
top panel is used for:
- starting and stopping the device: OI (Figure 3,
ref. 2)
- setting the ultrasonic power: 1 to 20
Its display is divided into 4 coloured sectors each
having 5 positions.
The power on indicator (Figure 3, ref. 3) shows
the colour and no. of the chosen power setting:
- green: 1 to 5: very low to low power
- yellow: 6 to 10: medium power
- blue: 11 to 15: high power
- orange: 16 to 20: very high power
The technology built into this device enables the
practitioner to work at a constant amplitude,
depending on the power level selected and
compensating for the effort applied.
Note: the power level for using tips should be
selected in accordance with the instructions in
the Tipbook and the tip colour coding system
(CCS tips).
handpiece
®
EWTRON